My Account                   Order Status
Search

213TTWR4026 – Marathon 7.5 HP Definite Purpose AC Motor, 3 phase, 1800 RPM, 208-230/460 V, 213TC Frame, TEFC – N618

213TTWR4026 – Marathon 7.5 HP Definite Purpose AC Motor, 3 phase, 1800 RPM, 208-230/460 V, 213TC Frame, TEFC – N618

213TTWR4026 Marathon Other Purpose Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

  • 10:1 Variable torque, Constant torque speed range as listed below
  • MAX GUARD® Class F insulation system
  • 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  • Double sealed ball bearings
  • 303 Stainless steel shaft with spring loaded contact seals in each endshield (Drive end only on TENV motors)
  • Stainless steel conduit box cover, nameplate, fan guard (TEFC only) and hardware
  • Cast oversized conduit box with high temperature nitrile gaskets and threaded entrance
  • Plugged drain holes in each endshield for all angle mounting
  • Internal corrosion resistant coatings on frame, base, endshields, rotor and stator
  • USDA-approved, white epoxy RUST-OLEUM® paint, UL Recognized, CSA Certified and CE Mark

Marathon Motors
Regal Beloit

Description

213TTWR4026 – Marathon 7.5 HP Definite Purpose AC Motor, 3 phase, 1800 RPM, 208-230/460 V, 213TC Frame, TEFC – N618

213TTWR4026 Marathon Other Purpose Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

General Specifications

Packaged Length: 22.94 IN Packaged Width: 16.44 IN
Packaged Height: 15 IN

Nameplate Specifications

Output HP: 7.5 Hp Output KW: 5.6 kW
Frequency: 60/50 Hz Voltage: 208-230/460 V
Current: 24-22/11 A Speed: 1760 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 89.5 % Power Factor: 72
Duty: CONTINUOUS Insulation Class: F
Design Code: B KVA Code: H
Frame: 213TC Enclosure: TEFC
Thermal Protection: NOT Ambient Temperature: 40 °C
Drive End Bearing Size: 6209 Opp Drive End Bearing Size: 6206
UL: Recognized CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: SQ CAGE IND RUN Starting Method: ACROSS THE LINE
Poles: 4 Rotation: REV
Resistance Main: 1.228 Ohms Mounting: RIGID
Motor Orientation: HORIZONTAL Drive End Bearing: BALL
Opp Drive End Bearing: BALL Frame Material: ROLLED STEEL
Shaft Type: T Overall Length: 18.21 in
Frame Length: 10.5 in Shaft Diameter: 1.38 in
Shaft Extension: 3.38 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Break-Down 0.00 72.00 320.0 0 7.50
Full Load 10.20 22.50 100.0 1,765 7.50
Locked-Rotor 70.00 51.50 229.0 0 7.50
Pull-Up 0.00 47.00 209.0 0 7.50

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 125 % 150 %
Current (Amps) 4.40 5.00 6.40 8.20 10.20 12.40 14.80
Rated Output (KW) 0.30 1.84 3.31 4.86 6.42 8.01 9.61
Efficiency (%) 0.0 77.6 86.4 87.7 87.9 87.4 87.1
Power Factor (%) 8.5 46.1 65.0 74.4 79.0 81.1 81.5
Speed (RPM) 1,798 1,791 1,783 1,774 1,765 1,754 1,743
Temp. Rise @ FL 0.0 0.0 0.0 0.0 56.5 0.0 0.0
Torque (ft-lbs) 0.00 5.60 11.30 16.90 22.50 28.10 33.80

Marathon Motors
Regal Beloit

Related products