My Account                   Order Status
Search

213TTWW16002 – Marathon 7.50 HP Washdown Motor, 3 phase, 3600 RPM, 230/460 V, 213T Frame, TEFC – N325

213TTWW16002 – Marathon 7.50 HP Washdown Motor, 3 phase, 3600 RPM, 230/460 V, 213T Frame, TEFC – N325

213TTWW16002 Marathon Washdown Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

  • Suitable for 10:1 CT 60 minute duty, otherwise 2:1 CT
  • MAX GUARD® Class F insulation system
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower
  • Double sealed ball bearings
  • 303 Stainless steel shaft with spring loaded contact seals in each endshield (Drive end only on TENV motors)
  • Stainless steel conduit box cover, nameplate, fan guard (TEFC) and hardware
  • Cast oversized conduit box with high temperature nitrile gaskets and threaded entrance
  • Plugged drain holes in each endshield for all angle mounting
  • Internal corrosion resistant coatings on frame, base, endshields, rotor and stator
  • USDA-approved, white epoxy RUST-OLEUM® paint

Marathon Motors
Regal Beloit

Description

213TTWW16002 – Marathon 7.50 HP Washdown Motor, 3 phase, 3600 RPM, 230/460 V, 213T Frame, TEFC – N325

213TTWW16002 Marathon Washdown Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

General Specifications

UPC: 722856131546 Weight: 133 LB
Packaged Length: 22.94 IN Packaged Width: 16.44 IN
Packaged Height: 15 IN

Nameplate Specifications

Output HP: 7.50 Hp Output KW: 5.6 kW
Frequency: 60/50 Hz Voltage: 230/460 V
Current: 17.6/8.8 A Speed: 3500 rpm
Service Factor: 1.15 Phase: 3
Efficiency: 89.5 % Power Factor: 88.5
Duty: Continuous Insulation Class: F
Design Code: A KVA Code: L
Frame: 213T Enclosure: Totally Enclosed Fan Cooled
Thermal Protection: No Ambient Temperature: 40 °C
Drive End Bearing Size: 6207 Opp Drive End Bearing Size: 6205
UL: Recognized CSA: Y
CE: Y IP Code: 55

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Across The Line
Poles: 2 Rotation: Reversible
Resistance Main: 1.3 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: T Overall Length: 16.59 in
Frame Length: 10.50 in Shaft Diameter: 1.375 in
Shaft Extension: 3.44 in Assembly/Box Mounting: F1/F2 Capable

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Break-Down 0.00 0.0 46.00 409.0 0 0.00 0.0 7.50
Locked-Rotor 87.50 994.0 34.60 308.0 0 0.00 0.0 7.50
Pull-Up 0.00 0.0 33.50 298.0 400 0.00 0.0 7.50
Full Load 8.80 100.0 11.25 100.0 3,500 0.00 0.0 7.50

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 % 150 %
Current (Amps) 3.00 3.70 5.20 6.90 8.80 10.00 10.90 13.20
Rated Output (KW) 0.23 1.65 3.12 4.63 6.20 7.15 7.82 9.52
Efficiency (%) 0.0 86.4 90.8 91.2 90.1 89.5 88.5 86.6
Power Factor (%) 9.4 55.9 75.2 84.2 88.4 89.7 90.1 90.5
Speed (RPM) 3,595 3,579 3,556 3,535 3,510 3,494 3,482 3,454
Temp. Rise @ FL 0.0 0.0 0.0 0.0 70.0 0.0 0.0 0.0
Torque (ft-lbs) 0.00 2.80 5.60 8.40 11.20 12.90 14.00 16.80

Marathon Motors
Regal Beloit