5BDD18FB-A – Belt Drive Downblast Centrifugal Roof Exhauster/Ventilator Fantech
Please advise CFM, static pressure, voltage, phase, and horse power on specifications, drawings, or existing equipment for an accurate quote. Please contact us for fan curves.
5BDD18FB-A – Belt Drive Downblast Centrifugal Roof Exhauster/Ventilator Fantech
All Exhausters/Ventilators are UL 705 Standard listed
Durable spun aluminum construction with steel support braces
Inlet temperatures up to 170°F
Backward inclined aluminum fan wheel
Equipped with a built-in bird screen to protect discharge
Externally cooled motor compartment
Roof Mounted Belt Drive Downblast Exhausters/Ventilators are designed to exhaust air out of commercial and industrial buildings. All models are for roof mounting only. Motor and wheel are easily detachable without removing Exhausters/Ventilators from curb. Permanently lubricated ball bearings (5BDD10 – 5BDD13) and regreasable pillow block bearings (5BDD15 – 5BDD24). Welded curb cap corners eliminate water entry into ducts or building. Ball bearing motors and variable pitch drives are packed separately when ordered with Exhausters/Ventilators.
Please advise CFM, static pressure, voltage, phase, and horse power on specifications, drawings, or existing equipment for an accurate quote. Please contact us for fan curves.
5BDD18FB-A – Belt Drive Downblast Centrifugal Roof Exhauster/Ventilator Fantech
Technical parameters
Nominal data
Voltage (nominal)
120
V
Rated voltage
120 to 230
V
Frequency
60
Hz
Phase(s)
1~
Input power
932
W
Nominal power at shaft (P2)
1
HP
Input current
7.3
A
Impeller speed
1,100
RPM
Air flow
max 4,060
CFM
Temperature of transported air
max 170
°F
Max temperature of transported air, when speed controlled