My Account                   Order Status
Search

LM29658 – Leeson 15 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29658

LM29658 – Leeson 15 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29658

LM29658 Leeson Elevator Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

  • Intermittent duty
  • Suitable for Wye-Delta starters
  • 1.0 service factor and 70°C ambient rated
  • Three bolt circles, 12 mounting holes, and face mounting to accept both the IMO and Allweiler pumps
  • 10 foot long leads, spliced 40 inches from motor to prevent wicking of hydraulic fluid
  • Thermostat leads are marked P1 and P2
  • Class F insulation
  • Two stainless steel nameplates, one shipped separate for remote mount
  • UL recognized component listing and CSA approved

Leeson Motors
Regal Beloit

Original price was: $1,954.00.Current price is: $1,392.81.

Description

LM29658 – Leeson 15 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29658

LM29658 Leeson Elevator Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

General Specifications

UPC: 691720399927 Weight: 110 LB
Packaged Length: 17 IN Packaged Width: 13.5 IN
Packaged Height: 16 IN

Nameplate Specifications

Output HP: 15 Hp Output KW: 11.2 kW
Frequency: 60 Hz Voltage: 575 V
Current: 16.8 A Speed: 3525 rpm
Service Factor: 1 Phase: 3
Efficiency: 82.5 % Power Factor: 81.3
Duty: 120/80 Starts/Hour Insulation Class: F
Design Code: NO DESIGN CODE KVA Code: H
Frame: 160TZ Enclosure: Open Enclosed
Thermal Protection: Thermostats (N/C) Ambient Temperature: 70 °C
Drive End Bearing Size: 6307 Opp Drive End Bearing Size: 6307
UL: Recognized CSA: Y
CE: N IP Code: 10

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Wye Start Delta Run
Poles: 2 Rotation: Reversible
Resistance Main: 1.27 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Single Special Extension Overall Length: 14.53 in
Frame Length: 12.00 in Shaft Diameter: 1.25 in
Shaft Extension: 2.92 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Full Load 20.50 100.0 22.50 100.0 3,500 15.00
No Load 12.50 61.0 0.00 0.0 3,600 15.00
2/3 105.00 512.0 38.00 169.0 2,400 15.00
Locked-Rotor 125.00 610.0 36.00 160.0 0 48.0 15.00
Break-Down 100.00 488.0 62.00 276.0 2,975 75.0 15.00
Pull-Up 115.00 561.0 32.00 142.0 1,800 15.00
1/3 120.00 585.0 31.00 138.0 1,200 15.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 10.00 10.40 11.60 13.60 16.40 18.40 19.60
Rated Output (KW) 0.70 3.50 6.50 9.50 13.00 15.00 16.50
Efficiency (%) 0.0 79.5 86.5 87.5 86.5 86.5 85.5
Power Factor (%) 7.0 35.0 56.0 70.0 78.5 81.5 83.0
Speed (RPM) 3,600 3,578 3,555 3,535 3,500 3,490 3,480
Temp. Rise @ FL 0.0 0.0
Torque (ft-lbs) 0.00 5.50 11.00 16.50 22.50 26.00 28.50

Leeson Motors
Regal Beloit