My Account                   Order Status
Search

LM29667 – Leeson 30 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29667

LM29667 – Leeson 30 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29667

LM29667 Leeson Elevator Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

  • Intermittent duty
  • Suitable for Wye-Delta starters
  • 1.0 service factor and 70°C ambient rated
  • Three bolt circles, 12 mounting holes, and face mounting to accept both the IMO and Allweiler pumps
  • 10 foot long leads, spliced 40 inches from motor to prevent wicking of hydraulic fluid
  • Thermostat leads are marked P1 and P2
  • Class F insulation
  • Two stainless steel nameplates, one shipped separate for remote mount
  • UL recognized component listing and CSA approved

Leeson Motors
Regal Beloit

Original price was: $2,434.00.Current price is: $1,734.96.

Description

LM29667 – Leeson 30 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29667

LM29667 Leeson Elevator Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

General Specifications

UPC: 691720400012 Weight: 119 LB
Packaged Length: 17 IN Packaged Width: 13.5 IN
Packaged Height: 16 IN

Nameplate Specifications

Output HP: 30 Hp Output KW: 22.4 kW
Frequency: 60 Hz Voltage: 575 V
Current: 30.5 A Speed: 3510 rpm
Service Factor: 1 Phase: 3
Efficiency: 86.5 % Power Factor: 85.7
Duty: 120/80 Starts/Hour Insulation Class: F
Design Code: NO DESIGN CODE KVA Code: G
Frame: 160TZ Enclosure: Open Enclosed
Thermal Protection: Thermostats (N/C) Ambient Temperature: 70 °C
Drive End Bearing Size: 6307 Opp Drive End Bearing Size: 6307
UL: Recognized CSA: Y
CE: N IP Code: 10

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Wye Start Delta Run
Poles: 2 Rotation: Reversible
Resistance Main: .57 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Single Special Extension Overall Length: 14.53 in
Frame Length: 12.00 in Shaft Diameter: 1.25 in
Shaft Extension: 2.92 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Pull-Up 225.00 570.0 70.00 156.0 1,800 30.00
No Load 21.50 54.0 0.00 0.0 3,600 30.00
1/3 250.00 633.0 65.00 144.0 1,200 30.00
Locked-Rotor 250.00 633.0 75.00 167.0 0 49.0 30.00
2/3 200.00 506.0 80.00 178.0 2,400 30.00
Full Load 39.50 100.0 45.00 100.0 3,500 30.00
Break-Down 1,775.00 443.0 100.00 222.0 2,975 75.0 30.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 16.80 18.40 20.80 25.60 31.60 36.00 38.40
Rated Output (KW) 1.00 7.00 13.00 19.00 26.00 30.00 33.00
Efficiency (%) 0.0 81.5 87.5 88.5 87.5 86.5 85.5
Power Factor (%) 7.0 37.5 61.0 74.5 81.5 83.5 85.0
Speed (RPM) 3,600 3,580 3,555 3,530 3,500 3,490 3,475
Temp. Rise @ FL 0.0
Torque (ft-lbs) 0.00 11.00 22.00 33.50 45.00 52.00 56.50

Leeson Motors
Regal Beloit