My Account                   Order Status
Search

LM29673 – Leeson 50 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29673

LM29673 – Leeson 50 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29673

LM29673 Leeson Elevator Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

  • Intermittent duty
  • Suitable for Wye-Delta starters
  • 1.0 service factor and 70°C ambient rated
  • Three bolt circles, 12 mounting holes, and face mounting to accept both the IMO and Allweiler pumps
  • 10 foot long leads, spliced 40 inches from motor to prevent wicking of hydraulic fluid
  • Thermostat leads are marked P1 and P2
  • Class F insulation
  • Two stainless steel nameplates, one shipped separate for remote mount
  • UL recognized component listing and CSA approved

Leeson Motors
Regal Beloit

Original price was: $3,555.00.Current price is: $2,534.00.

Description

LM29673 – Leeson 50 HP Elevator Duty Motor, 3 phase, 3600 RPM, 575 V, 160Z Frame, OPEN – LM29673

LM29673 Leeson Elevator Duty Motors

Please advise CFM, static pressure, voltage, phase, and/or horsepower on specifications, drawings, or existing equipment for an accurate quote.

General Specifications

UPC: 691720400067 Weight: 171 LB
Packaged Length: 17 IN Packaged Width: 13.5 IN
Packaged Height: 16 IN

Nameplate Specifications

Output HP: 50 Hp Output KW: 37.0 kW
Frequency: 60 Hz Voltage: 575 V
Current: 46.5 A Speed: 3515 rpm
Service Factor: 1 Phase: 3
Efficiency: 89.5 % Power Factor: 90.5
Duty: 120/80 Starts/Hour Insulation Class: F
Design Code: NO DESIGN CODE KVA Code: G
Frame: 160TZ Enclosure: Open Enclosed
Thermal Protection: Thermostats (N/C) Ambient Temperature: 70 °C
Drive End Bearing Size: 6307 Opp Drive End Bearing Size: 6307
UL: Recognized CSA: Y
CE: N IP Code: 10

Technical Specifications

Electrical Type: Squirrel Cage Induction Run Starting Method: Wye Start Delta Run
Poles: 2 Rotation: Reversible
Resistance Main: .312 Ohms Mounting: Rigid Base
Motor Orientation: Horizontal Drive End Bearing: Ball
Opp Drive End Bearing: Ball Frame Material: Rolled Steel
Shaft Type: Single Special Extension Overall Length: 14.53 in
Frame Length: 15.35 in Shaft Diameter: 1.25 in
Shaft Extension: 2.92 in Assembly/Box Mounting: F1/F2 CAPABLE

Speed Characteristics

Curvepoint Current (Amps) Current (%) Torque (ft-lbs) (%) Speed (RPM) Rated Output (KW) Power Factor (%) Rated Output (Hp)
Locked-Rotor 275.00 474.0 200.00 267.0 2,950 76.0 50.00
1/3 350.00 603.0 150.00 200.0 2,400 50.00
Break-Down 425.00 733.0 150.00 200.0 0 41.0 50.00
1/2 400.00 690.0 125.00 167.0 1,200 50.00
Full Load 58.00 100.0 75.00 100.0 3,510 50.00
No Load 15.50 27.0 0.00 0.0 3,600 50.00
Pull-Up 375.00 647.0 135.00 180.0 1,800 50.00

Load Characteristics

% of Rated Load 0 % 25 % 50 % 75 % 100 % 115 % 125 %
Current (Amps) 12.40 16.40 24.80 35.20 46.40 54.40 59.20
Rated Output (KW) 0.90 10.50 20.50 30.50 41.50 48.50 53.50
Efficiency (%) 0.0 89.5 91.7 91.0 89.5 87.5 87.5
Power Factor (%) 7.0 63.5 82.5 88.0 90.0 90.0 90.5
Speed (RPM) 3,600 3,580 3,560 3,535 3,510 3,490 3,480
Temp. Rise @ FL 0.0 0.0 0.0
Torque (ft-lbs) 0.00 18.50 37.00 56.00 75.00 87.00 95.00

Leeson Motors
Regal Beloit